All categories Victoria Area
Logout
LoginSign up
Place Ad Newsletter Signup
All categories Victoria Area

$400 · Boss ME-90 MultiFx Pedal

Boss ME-90 MultiFx Pedal image 1
Boss ME-90 MultiFx Pedal image 2
Boss ME-90 MultiFx Pedal thumbnail image 1
Boss ME-90 MultiFx Pedal thumbnail image 2

On offer is an effectively brand new Boss ME-90 in the box. This pedal is too much for my needs and you can save $100 plus tax on an excellent multifx unit. The following are details: • All-in-one guitar processor with premium BOSS amps and effects • Easy stompbox-style sound creation with an intuitive knob-based interface • Superior sound quality with 24-bit AD/DA, 32-bit floating-point processing, and 48 kHz sampling rate • Eleven onboard AIRD amp models and 60 different effects derived from the flagship GT-1000 • Dedicated amp section plus seven simultaneous effect categories with multiple types to choose from • Edit parameters, swap out amp and effect types, and more with BOSS Tone Studio • Eight multi-function footswitches and a newly redesigned expression pedal with toe switch • 36 ready-to-play preset patches and 36 user patches for storing custom setups • Manual mode for pedalboard-style operation and Memory mode for switching complete patch setups • Rear-panel switch to optimize the audio outputs for a guitar amp or full-range sound system • Load up to three user speaker IRs with the ME-90 IR Loader software for Windows/macOS • Send/return loop for external pedals • Light, durable design and colorful status LEDs • Powered via four AA batteries or optional AC adaptor • USB-C connector for communicating with BOSS Tone Studio and audio recording/playback with music production software • Download and share ME-90 Livesets at BOSS Tone Exchange • Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device Specifications Sampling Frequency: 48 kHz AD Conversion: 24 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. DA Conversion: 24 bits Processing: 32-bit floating point Effects: 97 Types Memories: 36 (User) + 36 (Preset) Phrase Loop: 38 sec. (MONO) Tuner Internal Detection: +/-0.1 cent -Nominal Input Level INPUT: -10 dBu RETURN: -10 dBu -Maximum Input Level INPUT: +7 dBu RETURN: +7 dBu -Input Impedance INPUT: 1 M ohm RETURN: 1 M ohm -Nominal Output Level OUTPUT (L/MONO, R): -10 dBu PHONES: -10 dBu SEND: -10 dBu -Output Impedance OUTPUT (L/MONO, R): 1 k ohm PHONES: 44 ohms SEND: 1 k ohm -Recommended Load Impedance OUTPUT (L/MONO, R): 10 k ohms or greater PHONES: 44 ohms or greater SEND: 10 k ohms or greater Display: 7 segments, 2 characters (LED) Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type PHONES jack: Stereo miniature phone type USB COMPUTER port: USB Type-C(R) Bluetooth ADAPTOR connector: Dedicated connector DC IN jack Power Supply: Alkaline battery (AA, LR6) x 4, or AC adaptor (sold separately) Current Draw: 190 mA Expected battery life under continuous use Alkaline battery: Approximately 6.5 hours *This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use. Dimensions (W x D x H): 443 x 220 x 67 mm / 17-1/2 x 8-11/16 x 2-11/16 inches Maximum Height (W x D x H): 443 x 220 x 93 mm / 17-1/2 x 8-11/16 x 3-11/16 inches Weight (including battery): 2.9 kg / 6 lbs 7 oz Included Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY" *0 dBu = 0.775 Vrms *Specifications are subject to change without notice.

Ad #
40949515
Posted
October 18, 2024
Renewed
December 22, 2024
Expiry
January 21, 2025
Status
NOT SOLD
  • Phone
Email User
Last hour
Last 24 hours
Total
Views
0
3
104
Browsed
7
104
3148
Contact User
WRDW profile image
Email User
Email User